Power Through the Toughest Commercial Jobs
Recommended for use with the TurboJet Duct Machine
The new Cobra 5 Power Brush system from Air-Care is an advanced version of the workhorse that has been aggressively cleaning air ducts for 4 decades.
Continuously Variable Speed Control
35 Ft Long Cable/Brush
Forward/Reverse
Wired Remote
The Cobra 5 has a wired, handheld remote. It has Forward, Stop, and Reverse functions at the operators finger tips. Of course there are manual backup controls on the main motor box also. A guide to speed selection for most jobs is contained on the inside of the motor box.
The control panel has a variable speed motor dial that allows you to go from 0-1750 RPM.
The motor has plenty of torque to run the standard 3/8" steel cored cable for most ducts, but also has a "Low Torque" setting for use with the Dryer Duct Cable and 4" diameter brush or the Nest Claw.
The cable mount is the same as all previous Cobra Cables, so you have backward compatibility as well as forward compatibility with other models of Air-Care Cobras.
This product ships directly from the manufacturer. A customer service representative will contact you with the exact shipping expense after purchase.
Specification Description
Size: 11.5" W x 15" L x 10" H.
Weight: Motor Case with Remote: 28 lbs. - 3/8" Cable & Brush: 14 lbs. - Dryer duct cable & Brush: 5 lbs.
Power requirements: 115v 60 Hz AC, 7.5 amps (Optional 220 Volt 50/60 Hz)
Power Cord: 9 foot grounded plug with "computer" type connecting socket
Cable Sizes: Standard: 3/8" Core, 3/4" O.D. Nylon Housing, 35 Long (optional 50 ft cable available)
--- Optional: 5/16" core, ½" Housing Dryer Duct Cable, available in 20-Foot or 35-Foot Lengths. Comes with 4" Dryer Duct Brush.
Brushes: Standard: 18" Flex-E-Bristle Brush, Standard Black Bristles, for 4" to 18" ducts.
--- Optional: 12" Flex-E-Bristle Brush, Standard Black Bristles, for 4" to 12" ducts.
--- Optional: 36" Flex-E-Bristle Brush, Commercial Black Bristles, for 14" to 30" ducts
--- Optional: 4" Dryer Duct Brush, w/ Lint Buster Ball, for Flatted Cobra Cable
Operating Environment: 25 to 125 Deg. F (-4 to 50 Deg. C)
Construction: High Impact Black ABS with Hinged cover to protect controls
Panel Controls: Power Switch, Speed Dial and Fwd-Stop-Rev switch on Motor Unit
Remote 15 Remote Cable, FWD-Stop-Reverse
Controller: 90 Volt DC Controller with Speed, Torque and Load Correction with "HIGH" and "LOW" Torque Settings
Motor: 90 Volt High Torque DC Motor, 0-1750 RPM
|
